MMS Blog
NASF: OSHA Proposes New Workplace Exposure Standard for Respirable Crystalline Silica
Proposed rule would establish a new PEL of 50 μg/m3 with an action level 25 μg/m3 calculated as an eight-hour time-weighted average for general industry, half of the current standard
Read More
Anodizing that Withstands H2O2 Cleaning
Testing color anodized finishes in hydrogen peroxide gas plasma sterilization.
Read More
When Plating Meets the Jet Set
Houston plater specializes in finishing private aircraft interiors; company offers more than 130 standard finishes and unlimited custom-matching capabilities.
Read More
Waterborne Symposium 2014 Announces Program
The event kicks off with the Short Courses from February 24 – 25, followed by the Technology Showcase Exhibit Hall from February 25 – 27.
Read More
AAC Announce its Level 1 Workshop for 2014
This day long program is packed with anodizing information for those new to the industry, or those who want a refresher course on the basics.
Read MoreNASF: OSHA’s GHS HazCom Rule
OSHA’s implementation of the Globally Harmonized System deadline for the first round of regulations fell on Dec. 1, 2013.
Read More
CCAI Publishes 6th Edition of Powder Coating for Industrial Finishing Applications Training Manual in Color
208-page manual has been revised with new color graphics and photos, several new chapters and a re-written glossary that serves as a guide to operating a powder coating system and managing the process for efficiency and profit.
Read More
Dürr Expands In North America With Location In Mexico
The modern industrial complex with a workforce of around 280 employees opened October 28 and provides 50 percent more production and office space than the past location.
Read More
PPG Celebrates 50th Anniversary of Electrocoat
More than 100 employees from Springdale and the PPG Coatings Innovation Center attended, joined by PPG retirees who were instrumental in developing the breakthrough corrosion-protection technology.
Read More
Is Aerospace Finishing Filled to Capacity?
As Boeing and Airbus demand more finishing capacity, the challenges faced by owners of finishing businesses are pressing, as both customers and regulatory agencies amp up demands for management attention and resources.
Read MorePiling on for Powder Coatings
Lane Coatings targets construction market with fusion-bonded powder coatings, and are espousing the benefits of using the coatings on materials such as pilings and reinforcement bars used in road and bridge construction.
Read More
Industry Groups Challenge European REACH on Chromium Trioxide
challenge alleges that the commission erred in its assessment of chromium trioxide for authorization and failed to provide an exemption for the continued use of it and other related compounds in the surface coatings industry.
Read More
