MMS Blog
Nickel Saved is Nickel Earned
Those in the plating industry are continually working on the development of a process to recover valuable nickel from spent electroless nickel solutions. Now there is a two-stage method to do just that.
Read More
Bringing You the Future of Coatings with PVD
Products Finishing partners with Society of Vacuum Coaters
Read More
Microabrasive Precision Shot Peening
Precision shot peening brings an entirely new concept to the field of microabrasive blasting, and it is complementary to its larger cousin. Using glass bead media, several companies have been shot peening for years with microabrasive blasting technology.
Read More
PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Read MoreEmployment Inches Forward, Factory Production Rises
NASF Economist Ken Mayland says total nonfarm payrolls rose 155,000 for December, according to the Bureau of Labor Statistics; the two previous months were revised a net 14,000 higher as the unemployment rate for the last month of the year stood at 7.8 percent.
Read MoreNew Chromium Electroplating Housekeeping Requirements
Alert for Platers: Your Deadline is March 19, 2013 as EPA finalized the residual risk and technology review for the national emission standards for hazardous air pollutants (NESHAP) for hard and decorative chromium electroplating and chromium anodizing tanks under 40 CFR Part 63
Read More
StandardAero Gets Certification for Protective Coatings
Eight of its aircraft paint technicians have completed the Embry Riddle Aeronautics University/Society for Protective Coatings (SSPC) program in aircraft painting.
Read More
Q&A: Purple on Platinum-Plated Anodes
Is there any way to remove a purple compound off our platinum-plated titanium anodes so they can be reused?
Read More
Impact of REACH Regulation on the Global Finishing Market
This paper is a peer-reviewed and edited version of a presentation delivered at NASF SUR/FIN 2012 in Las Vegas, Nev., on June 12, 2012.
Read More
Q&A: Spray Gun Flow Rate Problem
Q. We have problems achieving consistent paint flow through our spray guns (typical rates range from 10 to 50 g/min).
Read More
