MMS Blog
Centrifuge Improves Waste Treatment
Roll Coater needed a more reliable water pollution control system. Therefore, the company installed a centrifuge with a new design that reduced downtime and reduced the company's waste treatment problem...
Read MoreChromium Plating Bath Contamination
Question: We recently had to dump a fairly large volume of hexavalent chromium plating solution because it was contaminated with a high level of zinc and other heavy metals.
Read MoreCoating Dock Hardware
Question: I am looking for information about how powder coating compares to hot dip galvanizing in terms of protection and cost.
Read MoreConsiderations for Applying UV Coatings
A variety of manufacturers are using UV coatings because they offer a fast curing, high quality and environmentally friendly alternative to traditional coatings...
Read MoreChromate Conversion Coatings and Temperature
Question: We manufacture small metal parts that are cadmium plated followed by a chromate conversion coating (QQ-P-416, class 2, type II). The parts are ink-jet marked and then baked at 340-400F for 8-30 min to cure the ink markings.
Read MoreDot Commentary: Using e-Mail To Reach Your Customers
Last month, I discussed some of my gripes involving e-mail.
Read MoreUV Powder - Evolution or Revolution?
The powder coating industry has enjoyed considerable growth for several decades due to environmental awareness and the presence of a large number of liquid paint operations that were ripe for conversion to an alternative technology.
Read MoreUV Automotive Applications
Did you know that every automobile produced in the U.S. has parts that are UV cured?
Read MoreCeramically Enhanced Ultrasonics
An in-depth look at the advantages of ceramically enhanced transducer technology...
Read More
