MMS Blog
Coating Air Conditioner Coils
We are using a two-component paint so we can’t dip the coils because of pot life problems. Any help you can give us will be appreciated.
Read MoreEMI Shielding with Turbine Power
EMI shielding can be a very expensive process. While using paints with metallic flakes is relatively inexpensive when compared to other shielding processes, the paints still cost about $200/gal. Therefore, Cybershield of Georgia, Inc. began using turbine-powered HVLP spray guns to dramatically reduce its costs and provide a better finish...
Read More
Pretreatment Makes Vending Machine One Tough Customer
Fawn Manufacturing's vending machines needed a finish that could withstand harsh climates, rugged weather and tough customers. It found a pretreatment package it liked and made it better, which made for a high-quality, durable powder coating finish that stood up to the most demanding environments....
Read MoreOn My Mind: The Numbers Game
Essentially, running a business has always been a numbers game.
Read MoreDot Commentary: The CueCat's Meow
Last fall, a company called Digital Convergence began giving away hundreds of thousands of hand-held scanners through partnerships with RadioShack, Wired magazine and Forbes.
Read More
New Plastics Plating Technology for 100-Year-Old Company
When Hansgrohe installed a plastics plating line, it tried to work with the newest and most advanced chemistry on the market; however, it found it couldn't simply take something off-the-shelf and start running. It had to be tailored to its specific products and objectives...
Read More"Bleach Test" Feedback
I was surprised at the interest in the so-called "Bleach Test" that I wrote about in the February issue.
Read More
What's Going on with MP&M?
The EPA has its position. Industry has its position. Each job shop affected by the rule has its position...
Read MoreHow to Convert to Powder Coating
We would like to know what type of powder coating could produce a similar finish. At the moment we have no experience with powder coating but have read about its many benefits.
Read MoreReducing the Red Tape Hassle
VOC and HAP limits are continually decreasing. And, the amount of regulatory red tape that painters must deal with seems to grow every year. But, a new service that will help you comply with your air permit requirements can save you time and money . . .
Read MoreNickel Troubleshooting Guide
To complement the Nickel Plating Primer article in this month’s issue, the web exclusive is a troubleshooting guide for nickel plating. The guide, provided by Plating Process Systems, provides a generic listing of some symptoms encountered with most nickel-plating processes and possible corrective actions…
Read MorePerspectives: Finishing Industry Market Research Report
The latest Surface Finishing Market Research Board (SFMRB) Report is on the newsstand.
Read More
