MMS Blog
Powder Coating Enhances High-Tech Gadgetry
Special pretreatment process enhances powder coating adhesion on magnesium...
Read MoreChain Cleaners
Question: In your June 1999 Painting Clinic you talked about dirt coming from the conveyor.
Read More
Speeding to the Finish
When Danco Metal Products switched from solvent-borne painting to powder coating, its coating and curing time dramatically decreased. Why the change? Mainly, it was from a new infrared curing oven that allows Danco to speed to the finish...
Read MoreMechanical Plating Q&A
Question: I have been told that you can plate parts using something called “mechanical plating.” What is this all about?
Read MorePretreatment for Florida Environment
Question: I have been powder coating motorcycle parts (used/refinishing) exclusively for 10 years.
Read MoreDelisting Plating Waste
Question: Several months ago, we changed our metal finishing operations so that we are only performing non-cyanide zinc plating on carbon steel followed by chromating.
Read MorePainting Brass
Question: I have a design that requires the use of brass (No. 360 copper alloy). This design requires that some portions be painted (epoxy primed and polyurethane topcoated). I have no experience painting brass and/or know if this alloy is even “paintable.” Could you provide some insight into this matter and recommend how to best prepare the surface for painting?
Read MoreUnknown Resins in Old Paint
Question: I am an analytical chemist by profession and an industrial consultant.
Read MoreReplacing Cr Tanks and Meeting MACT Limits
Question: I am the plant manager of a small, hard chrome plating job shop.
Read MorePainting a Victory
Polaris decided to add to its assortment of outdoor recreational equipment with a line of motorcycles...
Read MoreBlack Finish for Aluminum
Question: The original question from G.B. was, “I have instrument display bezels machined from 6061 aluminum plate.
Read More
