Contact
Reworking a Powder Finish
How can we rework scratches or other surface imperfections in a powder-coated finish?
Read MoreFilm Build Control
Are you aware of any standards on powder coating film thickness on complex structures?
Read MorePowder over Anodized Aluminum
What might be causing the powder coating to chip off anodized extrusions?
Read MorePowder Coating Brass Rails
Can I apply a powder coating on brass handrails that will be installed indoors, or is there a better process to get an oil-rubbed finish on brass?
Read MoreChemical-Resistant Powder
Do you have any suggestions for a chemical-resistant powder coating (preferably fluorinated) that is conductive or static dissipative and can cover stainless steel plates?
Read MoreClear Powder Over Polished Brass
We are thinking of going to a clear powder coating over our polished brass hardware components. What is the preferred method of stripping the powder off of rejects?
Read MoreApplying Chrome to Aluminum after Coating
How can we protect the powder coat finish in the corners of the aluminum storm doors we manufacture?
Read MoreRust on Steel with Clear Powder
What can be done to stop the rust from showing through or remove the rust before powder coating cold-rolled steel metal tubes?
Read MoreCoating Adhesion Failure
I have an issue with my RAL 5008 mini tex not adhering to aluminum extrusion.
Read More
Blisters in the Powder Film
What is causing the coating defect that randomly shows up on our parts, and how can we cure this problem?
Read MoreProper Coating Thickness
In phosphating, what coating thickness should be maintained for carbon steel components? Will the coating thickness differ from part to part after phosphating?
Read MoreCoating Options for Steel
We manufacture steel and aluminum mounting structures that are used to support solar panels in a variety of environmental conditions. Where might I find information on wet-coat processes we might consider and compare to powder coat?
Read More
