Parts Cleaning
Coating Process Options
What pretreatment process and conversion coating would you recommend for plating and powder coating on fluid-handling tubes, some of which are bent before powder coating and some after?
Read MoreIntellifinishing Parent Company Ranks On Inc.'s 5000 Fastest
The company had 90 percent growth since 2009, going from $17.5 million in sales to $33.2 million, which ranks it as the 24th fastest growing company in its home state of Kansas in the Inc. rankings.
Read MoreAxalta 20-Group Visits Wisconsin Powder Coater
While meetings are facilitated by Axalta Star Coater administrators, these groups contribute to their own agenda and have also chosen to participate in benchmarking exercises, comparing certain aspects of their business and how they perform.
WatchLint-Free Cloths
We have problems getting a clean surface to clear-coat bronze door skins. We wipe down the surface with lacquer thinner using microfiber cloths but get very small lint, fibers and specks in the finish. Do you have any suggestions?
Read More8 Things You Need to Know About Paint Booth Lighting
Global Finishing Solutions has come up with some helpful insights on lighting for paints booths which plays a crucial role in achieving a quality paint job.
WatchPassivation Concentration
I am reviewing my passivation process with nitric acid per ASTM 967 using nitric 2 (6.1.1.2), and am not sure how to mix or check the solution. I also want to be sure I am neutralizing correctly.
Read MoreVDA 19 and its Impact on European Manufacturing and Cleaning
The German Association of the Automotive Industry’s VDA Volume 19 is the first comprehensive standardization document for characterizing the cleanliness of products within the automotive industry’s quality chain.
Read MoreWheels of Fortune For a Florida Coater
Once a supplier to international companies, a Florida manufacturer now makes and coats its own aftermarket wheels after it discovered that 80 percent of the aftermarket wheel manufacturing business that used to be done in the U.S. is done overseas, and often not very well.
WatchAir Force Enlists New Plating Shop for Duty
The new Advanced Metal Finishing facility—$67 million of plating technology and safety —was unveiled with a ceremony and public tours, but it won’t be fully operation until the end of this year when work transfers slowly from the older, adjoining AMF building.
Read MoreHave a Blast Cleaning Parts
The concept of the wet blasting process in parts cleaning and surface finishing is straightforward enough: combine abrasive media with water to form a special slurry, then add regulated compressed air to control the pressure as it is discharged over a surface.
Read More