Electrocoating

Electroplating 1 May 2012

PPG Industries, AkzoNobel Launch New Aerospace Coating Products

The Aerocron primer from PPG’s aerospace coatings group is the first e-coat primer for airframe manufacturers and subcontractors; AkzoNobel’ Metaflex SP brand is a result of a two-year partnership between AkzoNobel Aerospace Coatings and Pantheon Enterprises

Electroplating 1 May 2012

Cyklos Building a Better Finishing Machine

Tornos rolls out its turnkey surface finishing machine, Cyklos, a self-contained apparatus that enables machining shops to integrate wet electrochemical or chemical surface processing into their manufacturing line. SEE THE VIDEO

Watch

Electrocoating 1 May 2012

NASF REPORT: Is EPA Playing Dirty With Chromium Data?

NASF’s Jeff Hannapel and Christian Richter point to major flaws, bad precedent in EPA chromium air rule. NASF leaders have submitted a 100-page package of comments to the EPA in response to the agency’s proposed rule for chromium finishing operations.

Electrocoating 1 May 2012

Redneck Jokes and Finishing

At the ECOAT 2012 Conference in Orlando, Fla., last month, we addressed the topic “What Underperforming Finishers Don’t Know (That Good Ones Do).”

Powder Coating 1 May 2012

Finding Lost Profits In Your Finishing Line

The finishing division of White Castle restaurants teamed with Profit Finders, a continuous improvement company specializing in data collection and analysis, to look at ways to increase process efficiencies.

Liquid Coating 1 May 2012

Sand + Snow Makes Pretreatment Essential

Polaris' finishing department made sure its cleaning and pretreatment process was doing the job right before they electrocoated and powder coated popular off-road vehicles, snowmobiles, motorcycles and military vehicles. SEE THE VIDEO

Watch

Electroplating 1 May 2012

Aerospace Sector Plans Rebound

Aerospace is our featured topic this month in Products Finishing magazine, and one of the pressing issues facing those who make their living off of contracts from the military and aerospace companies is the health of the industry. Last fall, the International Association of Machinists and Aerospace Workers wrote to President Obama in order to help preserve the aerospace and defense industry and its workforce from the substantial downsizing that defense budget cuts would bring. But Craig Hanriot, president of leading aerospace metal finisher Technical Metal Finishing in Burbank, Calif., says the plea to maintain defense spending may have been too little, too late. He says the culmination of the Iraq war, Afghanistan military activities winding down and a huge national debt were enough for the U.S. Congress to cut military spending by $350 billion over the next 10 years.