Liquid Coating
Q: Best type of polymer for a baking enamel?
Carl Izzo has the answer to this question and many others
Read MoreLatex Spraying Revisited
I read the letter from G.S. in the August issue concerning the spraying of a latex.
Read MoreSolving Intercoat Adhesion Problems
When a part is rejected because of a paint defect, we try to recoat it, but the second coat won’t adhere to the first, causing us problems. What is the best type of polymer for a baking enamel that allows it to be recoated with excellent adhesion?
Read MoreCoat the I-Beam with Parylene
Q. Let me suggest another alternative to your suggestions for treating the piece of steel from the World Trade Center, described in the September issue.
Read MorePPG's CEO says coatings revenues up 30%
Sales have doubled since 2001; now account for 80% of company revenues
Read More“Petty Blue” goes green as Petty’s Garage converts to BASF Waterborne Paints
First car painted with Onyx HD is Petty Signature Series Mustang
Read MoreSoaring to New Aerial Paint Heights
PPG, Sherwin-Williams release improved aerospace paint
Read MoreReducing the Chance of Spray Booth Fires
In the finishing industry, there is a real connection between safety and quality—especially when it comes to spray booths, which can run the risk of causing fire if not properly maintained. A review of basic safety precautions, plus a look at the National Fire Prevention Association standards that address fire safety in Spray booths.
Read MoreChevy Sonic Gets Eco-Friendly Paint Job
Thanks to this system, as well as other recent shop enhancements designed to minimize energy use and paint-solvent emissions, Orion Assembly’s paint facility will reduce greenhouse gas emissions by approximately 80,000 metric tons each year at full production, cut solvent emissions by about 108,000 lbs. annually, slice $40 of manufacturing costs from each vehicle and use 50 percent less process energy per vehicle—all while being heated by natural and landfill gas instead of more emissions-intensive coal-fired boilers.
Read More