sales
Elsyca Designs, Optimizes Electrochemical Processes
Elsyca’s processes include electroplating, electropolishing, ecoating, electroforming and anodizing.
Read More
Arkema's Kynar Flex PVDF Resists Corrosion
These resins are designed to bring chemical resistance and prolonged life to plating equipment.
Read More
Celebrities Who Once Worked in Electroplating
Over many years, AESF/NASF stalwart Jack Dini contributed a series of fascinating columns to Plating & Surface Finishing, under the title Fact or Fiction?. What follows is a welcome addition to his output for the NASF. Still the prolific writer, Jack discusses celebrities (both scientists and non-scientists) who once worked in electroplating.
Read More
AES Research Project #41: Plating on Aluminum, Part 2: Morphology
Originally published in 1980, this paper was the second on AES Research Project #41, plating on aluminum, at the National Institute for Science and Technology. A study of the morphologies of zinc and tin immersion deposits on Al and its alloys showed that zinc formed epitaxial deposits on alloys, as noted on pure Al. Similarities exist between the zincate and stannate processes; in particular, the same crystallography orientations are active in both systems. Comparisons between zinc deposits produced from solutions containing ferric chloride and Rochelle salts and deposits from the same solution without these additions show that ferric chloride plays a fundamental role in the deposition process.
Read More
AES Research Project #41: Plating on Aluminum, Part 1: A Literature Review
Originally published in 1978, this paper was the first of several on AES Research Project #41, a study of plating on aluminum, at the National Institute for Science and Technology. A review of immersion pretreatments for the plating on aluminum is presented. The zincate pretreatments dominate the literature, but innovations were reported which offer improved adhesion and corrosion performance. Finally, an updated bio on Dr. Lashmore’s work through the years is offered.
Read More
Jim Toth Solutions Provides Plating, Coating Support
Company provides consulting services and supplies pumps and filtration systems.
Read More
Divine Brothers Installs Tenter Frame to Mill-Treat Cloth
Longstanding finishing supply company Divine Brothers installed its own tenter frame to mill-treat its own cloth.
Read More
Midwest Air Products to Display Range of Pollution-Control Products
Products are designed to solve environmental control problems and include corrosion-resistant PVC air pollution control equipment.
Read More
ALTANA Names Next President of BYK Division
Dr. Tammo Boinowitz will become managing director of specialty chemical supplier ALTANA’s BYK division in January 2021 and transition to the role of president.
Read More
Veolia Water Technologies Helps Optimize Resources
Group designs and provides water, waste and energy management solutions that contribute to industry sustainability.
Read More
