Articles
Nickel: Science, Health and the Future - The 52nd William Blum Lecture
This presentation is the 52nd William Blum Lecture, presented at SUR/FIN 2015 in Rosemont, Illinois on June 8, 2015. In this lecture, Dr. Hudson Bates discusses the nickel research in his group at the Nickel Producers Environmental Research Association (NiPERA), which impact occupational health and environmental issues for nickel. This includes nano-particulates, toxicity of mixtures, ambient air effects, and providing good science in regulatory matters.
Read More
GE Aviation, Praxair Open Jet Engine Coatings Facility in Mississippi
PG Technologies is a joint venture between Praxair Surface Technologies Inc., a wholly owned subsidiary of Praxair Inc., and GE Aviation.
Read More
Surface Finishing Sustainability: Technology Pathways - The 51st William Blum Lecture
This presentation is the 51st William Blum Lecture, presented at SUR/FIN 2014 in Cleveland, Ohio on June 9, 2014. In this lecture, Dr. Yinlun Huang discusses the critical issue of sustainability in manufacturing with the primary focus on the surface finishing industry, and the technology directed toward addressing the issue.
Read More
Decorative Electroplating: Theory to Explain Rapid Corrosion Due to Calcium Chloride ‘Russian Mud’ - The 48th William Blum Lecture
This presentation is the 48th William Blum Lecture, presented at SUR/FIN 2010 in Grand Rapids, Michigan on June 14, 2010. In this lecture, Dr. Donald Snyder describes the phenomena behind a new challenge to decorative Cu-Ni-Cr plating, catastrophic corrosion failures involving the use of calcium chloride on Russian highways
Read More
Mankiewicz Coatings Undergoes $30M Expansion at Charleston Facility
This expansion is quick, as the company only opened the initial $25 million, 90,000-square-foot facility in 2015.
Read More
BASF Coatings Supplies New Belarus Auto Plant for BelGee
The BelGee Belarusian site currently has capacity to produce 60,000 car bodies a year, with the option to expand.
Read More
Bus Maker to Invest $28M in New Facility, Coatings
The facility will include powder coating, as well as hose manufacturing, injection molding and thermoforming plastics, metal fabrication, and machining.
Read More
CCAI Minnesota Paint and Powder Coating Expo Seeks Presenters
The Twin Cities Chapter of CCAI and the Minnesota Technical Assistance Program at the University of Minnesota are hosting the Minnesota Paint and Powder Coating Expo on March 15 at Century College in White Bear Lake near St. Paul.
Read More
Uyemura CEO Tony Revier Honored for Service, Contributions
Revier was honored as one of the the University of La Verne’s 125 Most Notable Graduates at a ceremony commemorating its 125th anniversary. The awards were presented by university President Devorah Lieberman to alumni based on four criteria.
Read More
The $178 Billion Plating Shop
Go inside the Plate Manufacturing Division of the U.S. Bureau of Engraving and Printing’s picturesque building at 14th Street SW in Washington, D.C. The BEP is this nation’s sole producer of U.S. paper currency, also known as Federal Reserve Notes.
WatchUsing Air Chop to Reduce Costs and Improve the Liquid Color-Change Process
My company has recently added several additional colors to our production mix. How do we reduce costs and improving the color-change process? Nordson’s Robin Schwamberger offers some advice.
Read More
Choosing the Right Finish for Coastal Projects
Aluminum architectural products are susceptible to corrosion, and proper steps must be taken to minimize its occurrence when they are located in harsh seaside and coastal regions.
Read More
