Larry Chesterfield

Larry Chesterfield

Anodizing

Titration Methods for Sulfuric Acid Anodizing Baths

Do you have a recommended analytical method to determine the sulfuric and aluminum concentrations in sulfuric anodizing solutions?

Read More
Anodizing

Sulfuric Acid Anodizing Bath Makeup

Can you explain the ratio of acid in the anodizing bath and whether it is calculated by volume or by weight?

Read More
Anodizing

Salt Spray Failure on Type I and Boric-Sulfuric Anodize Coupons

What can be done to keep Type I and boric-sulfuric anodize from failing salt spray testing?

Read More
Anodizing

Sealing with Distilled Water

Can distilled water be substituted for deionized water?

Read More
Anodizing

Making Sense of Anodized Aluminum Finish Callouts and Designations

What are the differences between the Aluminum Association Designation AA- A31 and the MIL-A-8625, Type II, Class 1 anodizing finishes?

Read More
Anodizing

Science of Successfully Anodizing Die Cast Substrate

Die castings pose some of the most challenging problems in anodizing. This paper provides some explanations by tying together metallurgical science with anodizing practice.

Read More
Anodizing

Galvanization in the Caustic Etch Bath

What is the maximum zinc level allowed in a caustic etch bath?

Read More
Anodizing

Poor Anodic Coating Quality on Alloy 5083

Why is alloy 5803 not dyeing properly in the anodizing bath?

Read More
Anodizing

Stripping Type III (Hardcoat) Anodic Coatings

Is there an effective way to strip Type III (hardcoat) anodic coating from parts while removing as little substrate as possible?

Read More
Anodizing

Measuring the Color of Anodized Coatings with a Colorimeter

Is there a set standard in the anodizing industry for measuring and matching colors?

Read More
Anodizing

Adhesion of Applied Organic Coatings

Our expert addresses an amalgamation of many different questions from folks who are baffled and frustrated by this adhesion problem on their anodized parts.

Read More
racking

Racking Without Visible Rack Marks

What is the process of racking a machined part to be anodized with no visible rack marks?

Read More
The Finishing Industry’s Education and Networking Resource
Heatmax Heaters ad with immersion heaters
New Acid-Free Bright Nickel Process
Heatmax Heaters ad with immersion heaters
Pretreatment Washer and Finishing Equipment
PMTS 2025 Register Now!
Metal Pretreatment Technology
find masking products online
cfs masking