Electroplating
Alkaline Zinc Systems Answer the Call for Integrated Solution
Asterion introduces a comprehensive plating system covering demands for productivity, corrosion resistance and appearance.
Read MoreHow to Pass a 100-Hour Salt Spray Test for Electroless Nickel
Q. One of our most recent requirements is to pass a 100-hour salt spray test with our current medium phosphorus electroless nickel process. Our present EN does not seem to pass this test on a consistent basis. How we can pass this test?
Read MorePaul Brancato Leads Epner and NASF
Epner Technology co-owner is tapped as new NASF president. His main goal is to improve communications to its members and those who are non-members.
Read MoreParts2Clean Show Addresses New Cleaning Challenges
Global trends such as electromobility, lightweight construction, Industry 4.0, sustainability and more at show Oct. 24-26 in Stuttgart, Germany.
Read MoreProduction Schedule Driven Automated Energy Management
Surface finishing line process automation systems are normally designed to optimize production throughput and assure compliance with operating parameters such as time-in-tank. The basic elements of automated energy management on process lines are control of energy consumption in active, standby and inactive states, primarily by ventilation, heating and cooling, agitation and filtration. This paper presents a case study of the new process control model.
Read MoreVideo: Watch New Coating Protect iPhone Dropped into Pint of Guinness
The company says the video is designed to show how the electronics industry can now achieve the IPX-7 (30 minutes submersion in water at a depth of 1 meter) or more of waterproofing that is so required by mobile device manufacturers.
WatchThe Nature, Cause and Effect of Porosity in Electrodeposits: A Microscopic Examination of Nickel-Chromium Coatings after Atmospheric Corrosion
This paper is one of seven reports constituting AES Research Project #13, dealing with the nature, cause and effect of porosity in electrodeposits, performed at the then-National Bureau of Standards, in Gaithersburg, Maryland. It was one of several seminal articles produced through AES Research during the height of the automotive/decorative segment of the surface finishing industry in the 1950s and 60s.
Read MoreMFASC Golf Tourney Brings Together Friends, Duffers for Good Cause
All money raised goes directly to funding association programs and important advocacy efforts.
Read MoreCalifornia Metal Finishers Holding Legislative Action Day May 8-9
The event is designed to get across to the state officials that the surface finishing industry contributes $15 billion to the California economy and employs over 100,000 people in the state.
WatchWhat to Consider When Applying a Classic Black Finish
Q. What are the best options for a durable black finish? Uyemura's Rich DePoto answers that question.
Read More