Electroplating
Arresting Indoor Air Quality Criminals in Metal Finishing and Chemical Tanks
These so-called ‘criminals’—indoor air quality criminals, that is—can escape from open surface tanks causing irritation or harm to operators.
Read MoreAtotech Acquires Pegastech Plating on Plastics Technology
Pegastech has developed a technology for plating on plastics that does not use hexavalent chromium or palladium compounds for the pretreatment of polymers prior to electroplating.
Read MoreTechnical Communication - The 20th William Blum Lecture
This article is a re-publication of the 20th William Blum Lecture, presented at the 66th AES Annual Convention in Atlanta, Georgia, on June 25, 1979.
Read MoreResearch and Decorative Coatings - The 19th William Blum Lecture
This article is a re-publication of the 19th William Blum Lecture, presented at the 65th AES Annual Convention in Washington, DC, on June 26, 1978.
Read MoreIron Tungsten Alloy Plating with Low Friction and Wear Resistance
The modern automotive industry has been striving to reduce energy loss caused by friction. An alloy plating film developed by finely crystallizing iron and tungsten demonstrates both a high level of hardness and excellent ductility. In addition, low friction can be achieved by its application under a layer of lubricant. It also has the merit of greater cost performance as compared with DLC produced with PVD technology.
Read MoreStudy Shows Gallium Nitride Almost as Durable as Diamonds
Four Lehigh engineers report a previously unknown property for GaN: its wear resistance approaches that of diamonds and promises to open up applications in touch screens, space vehicles and radio-frequency microelectromechanical systems.
Read More2017 Hall of Fame Inductees
Frederick Gumm, John Horner, Dr. Leslie Lancy, John Lindstedt and Milt Stevenson Sr. were elected by a panel for their contributions to the surface finishing industry.
Read MoreReducing Hexavalent Chromium in Military Anodizing Operations
How U.S. Air Force facilities transitioned a dichromate sealer replacement.
Read MoreHow to Barrel Plate Sulfamate Nickel
Coventya’s Brad Durkin explains what to do when barrel parts experience poor adhesion, flaking and deposit poor ductility resulting in high rejection rates.
Read MoreDifferences in Masking and Plug Materials
Q. Can you explain the differences between masking caps and plugs?
Read More