Pollution Control
Better Alloy Control of Alkaline Zinc Nickel Baths
The factors that influence nickel content in deposits from alkaline non-cyanide zinc nickel baths.
Read More
MAMF To Celebrate 100th Anniversary in April
The MAMF was formed in 1917 and is one of the oldest surface finishing associations in the U.S., formed shortly after American Electroplaters Society formed in 1913.
Read More
PPG Coatings Selected by Airbus for A350-1000 Launch Aircraft
A PPG low-density fuel tank and fuselage sealant provides the three flight-test aircrafts with weight savings compared with traditional sealants and will be used on production A350-1000 airplanes to benefit operators.
Read More
Dayton's Plating Technology Plans $930K Expansion
Their facilities in Dayton and Columbus, Ohio provide a wide range of alloy finishes including tin zinc, zinc nickel, zinc iron and organic coatings.
Read More
80 Years Helping Finishers
Our readers share how Products Finishing has helped their careers as the magazine celebrates its 80th year covering the finishing industry.
Read More
Coating to Help Europe's Telecom Satellites Keep Their Cool
A surface coating originally developed for medical implants is set to safeguard the next generation of European telecom satellites.
Read More
Axalta Coating Systems Opens Powder Coating Learning and Development Center
Facility serves Axalta’s customers as well as those interested in learning more about powder coatings or advancing their application skills; classes are available in both English and Spanish.
Read More
ASETSDefense Workshop 2016: Sustainable Surface Engineering for Aerospace and Defense
Workshop on Sustainable Surface Engineering for Aerospace and Defense will be held at Shades of Green, the Armed Forces Recreation Center at the Walt Disney World Resort in Orlando from December 6-8.
Read More
Improving Acid Zinc Coverage and Brightness
Q. We plate our parts in a mixed acid-zinc rack bath, containing both ammonium and potassium chloride. How do we improve our zinc deposit’s clarity, brightness and thickness, especially in the low current density (LCD) areas of our parts without sacrificing throw power and without plating for excessively long periods of time?
Read More
Downdraft Versus Cross-Draft Booths
Q. We are considering a new spray booth, and we’ve read a lot about the different types of airflows. What can you tell me about downdraft booths and cross-draft booths, and what should I consider in adding one to my shop?
Read More
