sustainability
.jpg;maxWidth=400;quality=70;format=webp)
Progress in Replacing Decorative Electroplating Chrome Coatings on Plastics with Physical Vapor Deposition Coatings
Decorative electroplated chrome coatings on plastics have been produced for decades. For environmental reasons, there has been a shift away from hexavalent chrome (Cr6) to trivalent chrome (Cr3) with increased investments towards elemental chrome PVD coatings to maintain the true chrome appearance.
Read MoreNickel Recovery from Filter Press Cake
Is the recovery of nickel metal from waste sludge considered recycling, reusing or reclaiming?
Read MoreMore Environmental Cases are Going Criminal
Surface finishers and others operating in industries highly regulated by federal, state and local environmental protection agencies have seen an increase in the number of violations that have escalated from administrative notices of violations and fines, or even civil penalties, to criminal prosecutions
Read More
Mechanical Vapor Recompression Evaporation
MVRE is underutilized in the treatment of industrial wastewaters that are typical of metal fabricating and finishing industries. Increasing energy costs, rapidly decreasing freshwater resources, and growing sensitivity towards the environmental impact of industrial management practices are the driving forces in the development of more sustainable technology.
Read More
nCoP Takes the Hex Out of Chrome Plating
Electrodeposited nanocrystalline cobalt-phosphorus (nCoP) has emerged as a viable environmental alternative to hard chromium coatings for both line-of-sight (LOS) and non-line-of-sight (NLOS) applications. The coatings’ material properties revealed that nCoP has high hardness, enhanced ductility, lower wear rates, superior corrosion resistance and no issues with hydrogen embrittlement after baking.
Read More
Electrodeposition of Nanocrystalline Cobalt-Phosphorus Coatings as a Hard Chromium Alternative for Use in DoD Acquisition Programs
Electrolytic hard chromium plating (EHC) is a critical surface finishing technology that is used for applying functional coatings for corrosion and wear resistance to aircraft components in manufacturing operations and for re-build of worn or corroded components. However, EHC plating baths contain hexavalent chromium, which is a known carcinogen and environmental hazard. Therefore, the replacement of EHC in aircraft manufacturing activities and maintenance depots is a high priority for the U.S. Department of Defense (DoD).
Read MorePowder Environmental Room
We are building a new powder system and wonder about the benefits of enclosing the powder booths in an environmental room. It is very expensive, and the climate control system also will cost money to operate. How can we justify the expense?
Read More
New Mexico School Features Eco-Friendly Anodized Walls
Bernalillo Elementary School achieves sustainable design goals using products by Linetec
Read MoreEPA One Step Closer to Finalizing New Emission Standards
Attorney and environmental expert Anthony Giuliani explains the EPA's new chromium rules due in 2012, which would amend the existing National Emission Standards for Hazardous Air Pollutants Emissions for hard and decorative chromium electroplating and chromium anodizing tanks by lowering the existing NESHAP limits for both existing and new sources.
Read More
NASF Says EPA Chromium Air Rules Have Major Flaws
Claims EPA Used Data from 'Phantom Facilities'
Read More
