MMS Blog

education 20 Dec 2019

Capital Cost Estimate Classes

Different levels of capital cost estimates provide key input for decisions over the life of surface finishing projects.

regulation 19 Dec 2019

Best Plating Practices for the Application of Brush Plated Zinc-Nickel

Brush plating is an industrial electroplating process designed for demanding OEM and repair applications, without the use of an immersion tank. This presentation demonstrates the best practices for brush plating zinc-nickel to meet the ASTM standards of hydrogen embrittlement and corrosion protection. From preparatory steps to the application of a trivalent chromium conversion coating, the proper plating techniques needed to meet the customers’ demanding requirements are discussed.

Four Supplier Resources to Get More Out of Your Surface Finishing System

Get the most out of your paint and powder coating line by taking advantage of a few resources that can not only optimize your systems but ensure max productivity from installation and long after.

18 Dec 2019

Graphene used to extend rechargeable battery life

Researchers from Western University finds that adding a carbon-based graphene layer extends lithium-ion rechargeable battery life up to 50%.

surfin 18 Dec 2019

Nanostructure of Porous Anodic Aluminum Oxide: Advances in Surface Engineering

Porous alumina membranes of anodic aluminum oxide (AAO) are widely used for the fabrication of various nanostructures and nanodevices. Over the last decade, nanowires, nanotubes and nanodot arrays, have been fabricated by the deposition of various metals, semiconductors, oxides and polymers inside the pores of AAO membranes. These structures are produced by changing the anodization conditions, during electrochemically self -ordering of AAO. One can obtain amorphous barrier-type oxides, crystalline barrier-type oxides or amorphous nanoporous oxides, but fabricating binary nanostructures is challenging. Here, we review methods to achieve diverse binary nanostructure arrays, including material, dimension and morphology.

Liquid Coating 16 Dec 2019

Elinor Coatings wins $3.2M Air Force Materials Research Subcontract

University of Dayton Research Institute (UDRI) and the Air Force Research Lab at Wright Patterson Air Force Base in Dayton, Ohio, award contract to research the areas of advanced behavior and life prediction of aerospace materials for the U.S. Air Force.

curing 16 Dec 2019

Combining Deburring, Cleaning, Drying in One System

The EcoCvelox modular machine provides a combination of high-pressure waterjet deburring and low-pressure parts cleaning processes.

Powder Coating 12 Dec 2019

Europe’s Tallest Building Gets Powder Coatings from AkzoNobel

Poland’s Varso Tower features a sleek black exterior which has been created by using a super durable topcoat on the cladding and profiles in a striking Noir Sablé shade.